how to make a flying fish

Bend the triangular part of a coat hanger into a big, round loop.Now bend the hook part of the coat hanger into a straight line.Wrap duct tape around the straight handle.Now it’s time for your chip bags. Cut along the crease lines to open up two jumbo chip bags. Clean the grease off the silver part with soap and water, and then scotch tape the two bags together.Turn it over so the silver side of the chip bag is facing down. Place the bottom of the wire loop onto the bottom middle edge of the wrapper.Now fold and tape the other side of the chip bag until the wire hoop is completely covered in wrapper.Now take your small chip bags and cut along the crease lines to open them up. Wash off the grease on the silver side of the bags.Cut the chip bags horizontally into one-inch strips.Now tape these strips to the inside of your wind sock at the back. Go all the way around the windsock until you have no more strips. You can add as many strips as you like!Make fish eyes for your windsock by cutting out two circles from a piece of white paper and colour in the eyeball with a black marker.Tape eyes onto the windsock with scotch tape.